The Norwesco 1" PP Female NPT Bolted Fitting (part 60505) is a bolted-style polypropylene (PP) fitting with a 1" female NPT thread. Norwesco also lists this part as the "1 Inch Bolted Poly Fitting...

The Norwesco 1-1/2" polypropylene female NPT bolted fitting (part 60513) is a tank accessory that provides a connection point with a standard 1-1/2" female NPT thread for your pipe, valve, or hose...

This is Norwesco's 3" bolted fitting with a polypropylene (PP) body and a 3" female NPT thread, part number 62471. As a bolted-style fitting, it mounts to the tank rather than threading in like a...

This is the Snyder steel stand built for 30° cone bottom tanks in the 2600 to 5600 gallon range — Snyder part 79300. A cone bottom tank can't sit flat on the floor; it needs a stand that supports the...

The Norwesco 3" Stainless Steel Ball Valve (part number 60488) is a full port ball valve for 3-inch lines. Full port means the bore through the ball is sized to match the line, so the valve is...

The Norwesco 300 Gallon Loaf Tank (part 42285) is a portable, loaf-style storage tank designed for jobs where a full-height vertical tank won't work. This tank comes in white and is made by Norwesco...

The Norwesco 60485 is a 1-1/2" stainless steel ball valve. It is a full port design, meaning the passage through the valve is sized to the nominal line size rather than necked down. If you need...

This 1" full port stainless steel ball valve from Norwesco (part 60483) is a simple, dependable shutoff for 1" lines. The full port design means the valve doesn't neck down the bore the way standard...

This Snyder 8" vented threaded tank lid is a replacement cover for tanks that take an 8-inch threaded manway lid. It's molded from polyethylene (PE). The threaded design screws down for closure, and...

The 1 1/4" Bolted Ball Valve from Norwesco (part number 61734) is a shutoff valve for tank plumbing. As a ball valve, it's used to open and close flow at the outlet or anywhere in your line where you...

The Norwesco 1/2" Bolted Ball Valve (part 60540) is a shut-off valve for flow control in a half-inch line. As the name indicates, it uses a bolted body design. It's a genuine Norwesco ball valve,...

The Norwesco/Handler Knife System (part number 30875) is a maker-confirmed accessory from the Handler/Norwesco line. When a component like this wears out or goes missing, sourcing the exact factory...

The Norwesco 20 Inch Underground Tank Lid (SKU N-63672) is the low-profile access cover for 20-inch riser openings on underground and septic-style systems. It measures 20 inches across and 4 inches...

The 10 Inch Vented Cap from Snyder Industries is a threaded polyethylene lid, molded in high density linear polyethylene, that closes off a 10-inch threaded opening on a poly tank. It measures 10...

The Norwesco 75 Gallon Vertical Water Tank is a compact black polyethylene water tank built for point-of-use and light bulk storage where floor space is tight. It stands 50 inches tall on a 23 x 23...

The Norwesco 300/500 Gallon Cone Bottom Stand is a painted steel frame built to carry 300 and 500 gallon cone bottom tanks with a 45-degree cone angle. Finished in black, the stand weighs 95 lb and...

The Chem-Tainer 70 Gallon Plastic Portable Utility Tank in black is a low, flat-bottom polyethylene tank built to haul water and other compatible liquids around a site, then sit stable when full. It...

The Chem-Tainer 65 Gallon HDPE Vertical Liquid Storage Tank (SKU TC2342IA) is a compact, free-standing polyethylene vertical tank built for liquid storage where floor space is tight. It stands 42...

The Norwesco 300 Gallon 45 Degree Cone Bottom Tank (SKU N-43848) is a white polyethylene cone bottom tank rated to 1.5 specific gravity, built for full-drain batching and chemical metering where you...

The Norwesco 400 Gallon Doorway Water Tank (SKU N-43856) is built to pass through a standard doorway: at 29 inches wide and 66 inches long with a 70-inch overall height, its slim footprint lets you...

The Norwesco 250 Gallon Doorway Water Tank (N-45722) is built to pass through a standard doorway, measuring just 25 inches wide. It molds in white polyethylene at the 25" x 54" configuration, holding...